How to setup Cura for WASP printers
First machine needs to be added. To add it go to Manage printers.
When inside Manage printers click on Add button to add the printer.
Then select to add a non-networked printer, select Custom FFF printer.
For WASP40100 use 400mm for width and depth. For height add 1000mm. WASP 40100 and 2040 both use an elliptical build plate and origin at center. Everything else can be left as it is.
WASP 2040 has a smaller build plate so use 200mm for width and for depth. Height is set to 400mm.
For WASP 40100 set following in the Extruder tab.
Extruder tab for 2040 is a little different.
After you have created the printers. Materials need to be added in order to obtain the correct flow rate for clay.
Natural clay material for WASP printers
When creating clay materials it is good to have some default printer added in order to add the material form Generic PLA material. There is no material with a diameter 1mm or 2mm so you have to add them. Below are settings for 1mm and 2mm diameter clay material (the first is used for WASP 2040 and the second for WASP 40100).
Print profiles for WASP printer inside CURA
After all is set you can download the following print profiles for printing. Layer height and line width must be altered when different size nozzles are used.
WASP 2040 Cura profile
WASP 40100 Cura profile
0